|
WELD
For most applications, the RCM is used to make a butt weld. Depending on the process line requirement, the weld can be used as a transport weld, being removed at the exit end of the line, or it can be used for coil buildup. Butt welds created using this machine are usually nearly as strong as the parent material.
PRODUCT RANGE
These machines can shear and butt weld material ranging from about 0.018" (.45mm) up to about 1" (25mm) thick and as wide as necessary. Recent machines have been used for strip up to 86" (2,150mm) wide. Any weldable material can be used on these machines.
STANDARD EQUIPMENT
Most RCM's are equipped with:
. Entry and Exit Side Guides
. Camber Compensation
. Entry and Exit Weld Clamps with 6" (150mm) vertical opening
. Positive Gap Control
. Automatic Welding Carriage with DC drive and Welding Torch(es)
. Double Cut Rotary Shear
. Backup Bar
. Scrap Cart or Conveyor
. Entry and Exit Passline Rolls
. Operator Station and Control Panel
. Hydraulic Power Unit
| 
